Описание

  • Escape release on the rear
  • With door monitoring contact
Approach direction Horizontal and vertical Can be adjusted in 90° steps Solenoid operating voltage
  • AC/DC 24 V +10%, -15%
Guard locking type
STP3Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid.
    Switching element
    2131Slow-action switching contact 2 NC + 1 NO + 1 NC (door monitoring contact)
    Escape release (C1993, long actuator shaft)This is used for manual release of guard locking from within the danger area without tools. With identification of On/Off position.
    Housing material Reinforced thermoplastic
    Weight
    Net 0,5 kg
    Ambient temperature -20 ... 55 °C
    Degree of protection IP67
    Mechanical life 1 x 106
    Contact material Silver alloy, gold flashed
    Switching principle Slow-action switching contact
    Installation orientation Any
    Number of door position NC contacts 1
    Number of guard lock monitoring positively driven contacts 2
    Number of guard lock monitoring NO contacts 1
    Connection
    3 x M20 x 1.5
    Approach speed
    max. 20 m/min
    Actuation frequency 1200 1/h
    Guard locking principle Closed-circuit current principle
    Locking force Fmax 2500 N
    Locking force FZh 2000 N
    Retention force 20 N
    Extraction force 30 N
    Actuating force 35 N
    Insertion depth min.24,5 mm
    Electrical connection ratings
    Thermal rated current Ith 4 A
    Utilization category according to EN 60947-5-1
    AC-15 4A 50V
    DC-13 4A 24V
    Solenoid operating voltage
    AC/DC 24 V -15% ... +10%
    Short circuit protection according to IEC 60269-1
    (Fuse) 4A gG
    Rated insulation voltage Ui 50 V
    Rated impulse withstand voltage Uimp 2,5 kV
    Switching voltage
    Min. at 10mA 12 V
    Switching current
    Min. at 24V 1 mA
    Power consumption 8 W
    Solenoid duty cycle 100 %
    Connection cross-section 0,34 ... 1,5 mm?
    Other
    C number
    C1993 Escape release long
    Reliability values according to EN ISO 13849-1
    Monitoring of guard locking and the safety guard position
    B10D 5 x 106
    Control of the guard locking
    Category Depending on external control of guard locking
    Performance Level Depending on external control of guard locking
    PFHD Depending on external control of guard locking
    In combination with Actuator BETAETIGER-S-GT-SNMechanical values and environment
    Overtravel 5 mm
    ''